User Tools

Site Tools


tutorial_en_autodl-irssi

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
tutorial_en_autodl-irssi [2014/05/11 19:16] h2owegreentutorial_en_autodl-irssi [2017/12/29 20:09] (current) h2owegreen
Line 50: Line 50:
 {{:irc_servers_new.png|}}  {{:irc_servers_new.png|}} 
      
-Now you have to enter the IRC Server information, which you will have noted from Announce Channels window above. In this case for IPT we enter the server as irc.iptorrents.com and the port 6667 (this is the standard port for irc and you may need to check with the tracker to confirm this). Next in the Nick box enter the username you use to log on to the trackers main site and in the Password box you enter your site logon password. In the Email box enter the email address associated to your tracker account.+Now you have to enter the IRC Server information, which you will have noted from Announce Channels window above. In this case for IPT we enter the server as irc.iptorrents.com and the port 6667 (this is the standard port for irc and you may need to check with the tracker to confirm this). Next in the Nick box enter the username you use to log on to the trackers main site (some sites require you to use <siteName_auto-dl>and in the Password box you enter your site logon password (again site dependent). In the Email box enter the email address associated to your tracker account.
  
 {{:irc_servers_url.png|}} {{:irc_servers_url.png|}}
      
-Now we will define the Channel to monitor for new releases.  Click on New and in Channel box enter the Channel information, which you will have noted from Announce Channels window above.  In this case for IPT we enter #ipt.announce (but in most cases it is just #announce). Now enter your tracker logon password into the Password box.  Most trackers need you to just register your nick on their server this is done in the Invite Command box and consists of a message to the nick server with your tracker logon password, if this does not work then a quick question to site staff will let you know what information is required here. Now click OK+Now we will define the Channel to monitor for new releases.  Click on New and in Channel box enter the Channel information, which you will have noted from Announce Channels window above.  In this case for IPT we enter #ipt.announce (but in most cases it is just #announce). Now enter your tracker logon password into the Password box (if required by the tracker).  Most trackers need you to just register your nick on their server this is done in the Invite Command box and consists of a message to the nick server with your tracker logon password, if this does not work then a quick question to site staff will let you know what information is required here. Now click OK. The actual specifics for each tracker varies from one tracker to the next so ir the basics do not work, ask a staff member on the tracker for their specific requirements.
  
 {{:irc_servers_channel.png|}} {{:irc_servers_channel.png|}}
Line 60: Line 60:
 Now we will check that all has been setup correctly. This is done from the servers Dashboard. Click on IRC Tools Now we will check that all has been setup correctly. This is done from the servers Dashboard. Click on IRC Tools
  
-{{:control_panel_irc_tools.png|}}+{{:Dashboard IRC.jpg|}}
      
 Now click on Access IRSSI Now click on Access IRSSI
  
-{{:irc_tools.png|}}+{{:IRC Tools.jpg|}}
      
 On the next window click Status tab and the connection status window will be loaded. What you are looking for is a successful connection to the tracker you have just added, here I have highlighted the relevant lines in blue. Also there should be a tab at the bottom with the channel name. In this case #ipt.announce. On the next window click Status tab and the connection status window will be loaded. What you are looking for is a successful connection to the tracker you have just added, here I have highlighted the relevant lines in blue. Also there should be a tab at the bottom with the channel name. In this case #ipt.announce.
Line 86: Line 86:
 {{:filters_new.png|}} {{:filters_new.png|}}
      
-With the General tab selected we can give the filter a name to remind us what it is filtering so for this example I will call it HD TV Shows. So in the Display Name box we put HD TV Shows, now we have to tell it what trackers to monitor so click Match Sites, scroll down to the tracker you want to monitor and click the tracker name ( if you wish to monitor more than one tracker continue scrolling to the next tracker and Ctrl + Click the name so both are highlighted) Now Click OK, their abbreviated names will appear in the box to the right separated by a “,”+With the General tab selected we can give the filter a name to remind us what it is filtering so for this example I will call it HD TV Shows. So in the Display Name box we put HD TV Shows
 + 
 +{{:filters_new_Name.png|}} 
 + 
 +Now we have to tell it what trackers to monitor so click Match Sites, scroll down to the tracker you want to monitor and click the tracker name ( if you wish to monitor more than one tracker continue scrolling to the next tracker and Ctrl + Click the name so both are highlighted) Now Click OK, their abbreviated names will appear in the box to the right separated by a “,”
  
 {{:filters_match_sites.png|}} {{:filters_match_sites.png|}}
Line 96: Line 100:
 Now click the TV/Movies Tab. This is where we enter the show filters. Now click the TV/Movies Tab. This is where we enter the show filters.
  
-Firstly in the TV Show/Movie box we enter search string for the show with a “*” at each end. This does not need to be the full name and words do not have to be separated by ”.” also capitalisation does not matter. In this case we want to download Marvels Agents Of ShieldThe next three parts are optional but if the trackers you use place many different resolutions/encodes or sources in each category then it is good practice to fill them.  To select resolution click the Resolution button and click on the resolution requiredThe same process for Encodes and Sources.+Firstly click the TV Show/Movie button, a box will appear where we enter the search strings for the shows we want to match. This does not need to be the full name and words do not have to be separated by ”.” also capitalisation does not matter. In this case we want to download all the Marvels TV showsBlack Mirror and all shows with the string "king" in it.  If we put "*" at the end of our search string it will match every torrent that contains the search string followed by anything, or nothingIf we start the string with a letter then the filter will only match torrents that start with the search string, for example "Marvels*" will match all Marvels shows, but would not match a show called "James Marvels at the Moon". if we start the search string with a "*" and end it with a "*" then the filter will match all torrents containing the search string, so for example "*King*" would match shows like, "Breakout __King__s". "__King__", "Of __King__s and Prophets", "__King__ of the Nerds", etc. Now click **OK**.
  
 {{:filters_show_name.png|}} {{:filters_show_name.png|}}
-   
-Should you wish to download several shows from the same tracker(s) with the same resolutions/Encodes/Sources then you just type more show filters into the TV/Movies box and separate each show with a “,”. To add more Resolutions/Encodes/Sources then click the relevant button and select the extra ones, each will be added to the existing separated by a “,”. If you need to remove one just click the relevant button and click the one to remove. 
  
-In this window we have chosen to download both Marvels Agents Of Shield and The Following in 720p and both h264 and x264 encodings and also in both HDTV and Web-dl sources.+The next three parts are optional but if the trackers you use place many different resolutions/encodes or sources in each category then it is good practice to fill them.  To select a resolution click the Resolution button and click on the resolution required. Repeat this  process for Encodes and Sources. 
 + 
 +{{:filters_resolutions.png|}}
  
-{{:filters_tv-movies.png|}}+Once completed click **OK**.
      
 Now we have to tell autodl-irssi what to do with our downloads, so first we have to create a new folder for the data to be stored. In rutorrents main window click on Explorer tab and navigate the right window to the root directory (the navigation bar will just contain a “/”), hover over an existing folder and right click and select Create>New Directory. Now we have to tell autodl-irssi what to do with our downloads, so first we have to create a new folder for the data to be stored. In rutorrents main window click on Explorer tab and navigate the right window to the root directory (the navigation bar will just contain a “/”), hover over an existing folder and right click and select Create>New Directory.
Line 110: Line 114:
 {{:new_directory.png|}} {{:new_directory.png|}}
      
-Now type in a Name for the directory and click OK+Now type in a Name for the directory and click **OK**.
  
 {{:new_directory_tv_shows.png|}} {{:new_directory_tv_shows.png|}}
Line 120: Line 124:
 {{:filters_torrent_action.png|}} {{:filters_torrent_action.png|}}
      
-Now in the Folders section click the browse button on the right {{:browse.png|}} , now navigate to the new folder we just created. If you use Labels to sort your torrents or to enable selective unraring then type the Label on the Label box.  You can select any of the Ratio Groups you have previously created so that once the torrent has satisfied the ratio requirements it is automatically Stopped/Removed/Deleted/set to a predefined channel. If you want to restrict the download and or upload speeds select the relevant channel from the drop down box, do the same with the priority box too if you want to select something other than Normal. Now you can click OK.+Now in the Folders section click the browse button on the right {{:browse.png|}} , now navigate to the new folder we just created. If you use Labels to sort your torrents or to enable selective unraring then type the Label on the Label box.  You can select any of the Ratio Groups you have previously created so that once the torrent has satisfied the ratio requirements it is automatically Stopped/Removed/Deleted/set to a predefined channel. If you want to restrict the download and or upload speeds select the relevant channel from the drop down box, do the same with the priority box too if you want to select something other than Normal. Now you can click **OK**.
  
 {{:filters_action.png|}} {{:filters_action.png|}}
tutorial_en_autodl-irssi.1399835764.txt.gz · Last modified: 2014/10/14 08:28 (external edit)